Bowman Bearing Selector

The Bowman Bearing Selector

The Bowman Bearing Selector has been developed to assist you in selecting the correct bearing for your project. This bearing selector reduces the uncertainty when selecting bushes and you can rest assured that whether you are in the design process or replacing a bearing in an existing application that you have selected the right one. The Bowman Bearing Selector will search our entire product range and select the bearing that corresponds to a set of parameters that you enter into it.

If you already know which bearing you need, you can use the bearing selector to review the technical information on that particular bearing. The bearing selector will show you the tolerances, load ratings, maximum speed, material information and much more.

How to use the Bowman Bearing Selector

  1. Enter your application parameters
  2. Click on one of the suggested bearings that meets your criteria to view the datasheet
  3. Give us a call on 01235 462500 or email us on sales@bowman.co.uk to receive your order within 24 hours!

Step One – Find a bearing

Select Product

Measurements

mm
mm
mm

Speed and Load

rpm
kg

Step Two – Selected Bearing

Flanged Bearing

Oilite®

Metric Oilite® Flanged Bearing

Part number: AL 12 15 16

Details

Inner Diameter 12
Outer Diameter 15
Length 16
Tolerance Range UK Standard
Flange Thickness 3
Flange Diameter 21

Material Specification

Structure Oil impregrated sintered bronze*
Max PV (N/mm² x m/s) 1.8
Max Static load (N/mm²) 50
Max Dynamic load (N/mm²) 14
Max Sliding speed (m/s) 5
Operating temperature (°C) -60 to 200*
*dependant on lubrication
Density (g/cm³) 6.6
Radial crushing strength (K Min M/mm²) 160

Tolerances & Fittings (Metric)

Min Max Tolerance
Inside Diameter 12.006 12.024 G7
Outside Diameter 15.028 15.046 s7
Overall Length 15.865 16.135 js13
Flange Thickness Tolerance 2.930 3.070 js13
Flange Diameter Tolerance 20.835 21.165 js13
Recommended Housing Size 15.000 15.018 H7
Shaft Diameter 11.966 11.984 f7
Fitting Pin Size 12.007 12.015 m5
Concentricity Max 0.043 0.043 IT9
Inside Diameter When Fitted 12.000 12.018 H7

PV Calculation

Values Maximum
rpm 7957.747 rpm
kg 978.593 kg
PV Factor N/mm² x m/s 1.8 N/mm² x m/s

Found what you are looking for?

Call us +44 (01235) 462500 or Contact us ›

Looking for something specific? Call us +44 (0) 1235 462500 or

Contact us ›