Materialspezifikationen für das Oilite® Programm

Oilite® Materialien

MaterialOilite®Iron Oilite®Super Oilite®Super Oilite® 16Super Oilite® 900
MB01-1MB01-2MB01-3MB02-3MB04-1
Kupfer (Cu) % Rest Rest Rest Nil 18.0 - 22.0 18.0 - 22.0 24.0 - 26.0
Eisen (Fe) % 1.0 Max 1.0 Max 1.0 Max Rest Rest Rest Rest
Graphit (C) % <0.3 <0.3 <0.3 <0.3 <0.3 0.6 - 1.0 Nil
Zinn (Sn) % 9.0 - 11.0 9.0 - 11.0 9.0 - 11.0 Nil Nil Nil Nil
Andere Elemente max. % 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Porosität P min. % 27 22 20 17 21 17 22
Ölgehalt min. % 24 20 18 15 19 15 20
Radial Crushing Strength K Min N/mm2 120 160 180 220 275 410 275
Dichte P Nominal g/cc 6.0 6.6 7.0 6.2 6.0 6.2 6.0
Statische Belastungm max. N/mm2 35 50 65 90 120 300 120
PV-Faktor N/mm2 × m/s 1.8 1.8 1.8 1.4 1.3 2.6 1.4
Dynamische Belastung max. N/mm2 10 14 18 20 28 55 28
V max m/s 6.0 5.0 5.5 2.0 1.0 0.2 1.0

MB01-1 Non standard available on request.

MB01-2 All products unless otherwise stated.

MB01-3 Applicable to DIN standard.

Other bearing materials for special applications are also available

NOTES:

  1. Density, oil content and open porosity determined according to BS EN ISO 2738:2000
  2. Radial crushing strength, according to BS EN ISO 2739:2010
  3. PV factor = Pressure (N/mm2) × bearing surface velocity (m/s) where pressure = load (N) ÷ Projected area (d × L) and d = inside diameter (mm).
  4. Bars, Cored Bars and Plates may contain up to 1% C.

Nearest equivalent specifications

MaterialMB GradeISO 5755:2012

UK 

FranceGermanyU.S.A.
BS 5600-5.1:1988 (superceded)NF ISO 5755/1 A 95-771-1DIN 30 910 PART 3M.P.I.F. STAND. 35S.A.E.A.S.T.M.
Oilite® Bronze MB01-1 C-T10-K110 P4011Z FU-E10-60   CT-1000-K19 840 B438
Grd 1 Type 1
MB01-2 C-T10-K140 P4012Z FU-E10-64 Sint A50 CT-1000-K26 841 B438
Grd 1 Type 2
MB01-3 C-T10-K180 P4013Z FU-E10-68 Sint B50 CT-1000-K37 842 B438
Grd 1 Type 3